About Us   |   Terms & Conditions   |   Contact Us

1:400 Scale
1:500 Scale

      Piers & Jetways


About Us
Terms & Conditions
Contact Us



B1008-500: Hangar Type 2 (1:500 Scale)

This model is inspired by the old BOAC hangar at Heathrow Airport which was built in the 1950s. It is designed to hold a pair of Boeing 757s, Airbus A320s, or similar types. The cantilever structure of the building is balanced by large concrete blocks on either side. These can be omitted if desired. Offices or workshops can be added at the sides as well, and two or more of the hangars can be joined to form a larger block. The inside is fully detailed.

Use Workshop Type 1 (model B1010), Office Blocks Type 1 (B1013) or Office Block Type 2 (B1016) in conjunction with this model.

Aircraft model not included

Aircraft model not included

With Office Block Type 1 (B1013) attached

With Office Block Type 1 (B1013) attached

Aircraft model not included

Real Dimensions: 21m high x 100m wide x 52m deep
Model Dimensions: 42mm high x 200mm wide x 104mm deep
Model Footprint: 200mm x 104mm
Number of A4 sheets: 6
Skill Rating: 3 (complex design)

Sheet 1 of 6

This document is maintained by DM Aviation Limited
All Material Copyright © DM Aviation Limited 2014